Cellix Limited

Microfluidic pressure pump capable of executing up to 8 assays in parallel in Vena8 biochips, providing 8-channel simultaneous flow control.

Entry-level package for VenaFlux Solutions tailored to suit budget requirements.

A microfluidic flow control system that includes the ExiGo Pump single channel syringe pump controlled by SmartFlo software, a microenvironmental chamber, plastic syringe, and tubing kit.

UniGo microfluidic pump is a precision pressure pump for a variety of microfluidic applications, where accurate and stable flow rate delivery is required.

Pump tubing kit for UniGo tailored for organ-on-chip and cell culture perfusion.

Pump tubing kit for UniGo dedicated to droplet generation applications.

A 4-channel precision pressure pump for microfluidic applications, delivering accurate, pulse-free flow rates with closed-loop active feedback.

Microfluidic pressure pump with 4 channels to pressurize reservoirs and push fluid into tubing connected to the microfluidic chip.

Tubing kit for the 4U pump system designed for organ-on-chip and cell culture.

Tubing kit for the 4U pump system optimized for droplet generation.

Easy to use software for PC / desktop compatible with Windows 7 or higher, providing versatile control of microfluidic syringe pumps and pressure pumps.

Recirculating pump for cell culture under flow, featuring 8-channel simultaneous flow control for endothelial cell monolayers in classic flow chambers or Vena8 Endothelial+ biochips.

Tubing kit configured for thrombosis assays using the MultiFlow8 system.

Standard tubing kit including resistance tubes for the MultiFlow8 system.

Microfluidic flow sensor with a measured flow range of ±80,000 nL/min (80 µL/min).

Microfluidic flow sensor with a measured flow range of ±7,000 nL/min (7 µL/min).

Microfluidic flow sensor with a measured flow range of ±1 mL/min (1,000 µL/min).

Sample injection system for microfluidic applications, featuring a plug-and-play interface and compatibility with 15mL Sarstedt tubes, 1mL, or 2mL Eppendorf tubes.

Sample reservoir compatible with 15mL Sarstedt tubes and 1mL or 2mL Eppendorf tubes, designed for pressure pumps like UniGo/4U.

Pack of 8 replacement nozzles for Multiflow8 manifold suitable for thrombosis applications.

Pack of 8 replacement standard nozzles for Multiflow8 manifold.

Tubing kit optimized for high flow rate general microfluidics and thrombosis applications.

Tubing kit designed for low flow rates tailored to cell adhesion applications.

Tubing kit for the ExiGo pump supporting low flow rates for general microfluidics.

Tubing kit for high flow rates in general microfluidics and cell adhesion.

Reservoir for pressure pumps compatible with Eppendorf tubes.

Sample reservoir compatible with 1mL or 2mL Eppendorf tubes for pressure pumps.

Tubing set featuring an 8-way splitter for Kima-Connect systems.

Tubing set featuring a 4-way splitter for Kima-Connect systems.

Female luer connector set for microfluidic setups.

Roll of Tygon tubing for microfluidic setups.

VenaFlux Pro is a vascular flow assay system designed to mimic human blood vessels for thrombosis, platelet adhesion, aggregation, and cell migration shear flow assays under temperature-controlled conditions.

Complete microfluidic flow control and assay system including the Mirus Evo Pump, VenaFluxAssay software, microenvironmental chamber, microscope, and digital camera for shear stress and vascular flow assays.

Complete automated or customizable solution for studying platelet adhesion, aggregation, and thrombi formation under physiological shear flow conditions.

Starter kit for microfluidic shear stress assay including Mirus Evo Pump, Microenvironmental Chamber, and Image Pro Cell Analysis Software.

Pulse-free syringe pump for low flow microfluidic applications featuring a high-resolution stepper motor drive mechanism with patented pulse damping and active feedback.

Thermal mass flow sensors designed for microfluidic syringe and pressure pumps, providing active closed-loop feedback and precise flow control.

Vena8 Fluoro+ biochips contain 8 parallel enclosed microcapillaries for continuous flow cell-based assays, designed for cell receptor-ligand studies and compatible with fluorescent immunostaining or confocal microscopy.

Microfluidic recirculating pump system including the Kima pump, Kima Controller with KimaFlo software for PC, tubing kit, and bottle accessories for cell culture perfusion applications.

Pack of 10 disposable pre-assembled single inlet cables to connect from output cable of Mirus Evo Nanopump to the single inlet cable of the biochip.

3-Way Valve for Microfluidic Pumps allowing switching between 3 different outlets with a switching time of ~30ms and automatic syringe recharging/refilling.

Mix & match up to 4 different pumps combining the advantages of syringe pumps and pressure pumps together in one set-up.

Each biochip contains 4 capillaries in parallel with a membrane of pore size 2-10 um diameter separating them from a microwell underneath for studying cell migration through the membrane under shear flow.

Disposable biochip offering flexibility with a glass coverslip supplied unattached for shear flow studies.

A reusable, autoclavable 8-way connection kit from microfluidic pumps to chips and waste with a 4.5mm SBS standard pin spacing.

Pack of 10 extension inlet cables specifically designed for thrombosis experiments.

Glass syringes compatible with the Mirus Evo Microfluidic Syringe Pump, available in various volume ranges from 100µL to 5mL.

A complete set-up for microfluidic droplet generation including microfluidic pumps, flow sensors, and chips.

Single channel pressure pump offering independent flow control; pumps can be plugged together.

Disposable plastic biochips containing branching microchannels for dual flow and dual injection of samples, ideal for studying chemotactic gradients, dual flow, multilaminar flow, and diffusion.

Pack of 10 inlet tubes for connecting syringe pumps to microfluidic chips.

Pack of 10 disposable inlet tubes connecting pump to the inlet of Cellix biochips.

Controller unit featuring 4 sockets to independently control up to 4 Kima pumps.

Disposable biochip with input port design to mimic branching microvascular networks, supporting chemotaxis assays, dual flow, multilaminar flow & diffusion.

Pack of 10 disposable outlet tubes connecting from outlet of Cellix biochips to waste or eppendorf.

Non-heated manual microscope stage frame compatible with 96-well plates.

Pack of 200 stainless steel pins for manual assembly of biochip single inlet and outlet tubes.

Software for simple cell analysis for images captured with microscope and digital camera, supporting analysis of morphology, cell flow, cell rolling, cell migration, and time-lapse movies for thrombosis and inflammation studies.

Plug and play 4-way splitter with tubing for pump.

Pack of 100 connectors with stainless steel pins for connection of syringe outlet to tubing.

Temperature-controlled microscope frame for microfluidic chips, equipped with a heated frame and ITO glass heater to heat the surface of microfluidic biochips.

Adapters to easily connect two fittings with different thread sizes together.

DropChips are fabricated from plastic (acrylic) and feature a 40mm x 50mm footprint containing a flow splitter and multiple droplet generator junctions including flow-focusing junctions.

Inverted microscope with fluorescence and manual stage, optimized for live cell imaging and microfluidic assay observation.

Inverted microscope with fluorescence and a motorized stage for live cell and microfluidic imaging.

GL45 glass bottle with plastic cap for long term cell culture and media recirculation.

Chip pre-coating solution for the production of microdroplets; 2.5mL.

Sample reservoir holder designed to hold 2 Eppendorfs with a magnetic bottom.

Droplet generation solution packaged in a 10mL bottle.

Standard sample and waste tubes for Inish Analyser.

Digital scientific CMOS camera delivering high resolution imaging and sensitivity with an optimized pixel design and near perfect quantum efficiency.

A buffer aiding in the label-free detection, cell counting, viability, and transfection efficiency analysis of cells in 100mL bottles.

Simple maintenance fluid designed for the Inish Analyser, allowing for a fast ~60 second wash protocol.

Calibration kit for simple maintenance and calibration assays of the Inish Analyser, providing 100 tests per kit.