Trinity Consultants

Tank emissions calculation software limited to fixed roof tanks, includes revised AP-42 Chapter 7 methodology, supports low-pressure, heated/insulated tanks, and flashing loss estimation using Laboratory GOR method.

A suite of modeling software used for offsite consequence analysis in Risk Management Program (RMP) compliance, capable of handling simple to complex release scenarios.

A suite of modeling software including air dispersion, fire and explosion models, health risk assessment, tank emissions calculation, and modeling data with high speed, remote modeling service.

Software for predicting structural damage and personnel injury from detonations of high explosives and vapor cloud explosions, with 3D graphs and animations for setup and results visualization.

A suite of agency-recognized and industry-standard models used for off-site consequence analyses, risk management planning, and meeting state and local air toxic modeling requirements.

A web-based application inheriting all functions and methodologies of TankESP in the ESP+ Tank Module, with ability to estimate emissions from many other sources at terminal and pipeline facilities. Subscription-based with four modules.

A screening model based on the U.S. EPA AERMOD air quality dispersion model that produces estimates of “worst-case” 1-hour concentrations for a single source, without the need for hourly meteorological data, and includes conversion factors to estimate “worst-case” 3-hour, 8-hour, 24-hour, and annual concentrations.

A tank emissions calculation software product suite using emission estimation procedures from U.S. EPA's AP-42 Chapter 7 for VOC emissions from storage tanks.

Modeling tool for analyzing potential risks associated with release of liquefied fuel gas (LFG) and liquefied natural gas (LNG).

Air dispersion modeling software used to support permit applications, compliance demonstrations, emergency response planning, and impact and feasibility assessments.

A service provided by Trinity Consultants to support air quality management through air dispersion modeling for regulatory compliance and environmental impact assessment.

A GIS-based analysis platform for conducting multi-pathway human health risk assessments, including a HHRAP module that automates all HHRAP calculations and reads dispersion model outputs like AERMOD.

A comprehensive emergency response and planning modeling system incorporating 12 industry standard models including 4 neutrally buoyant and dense toxic gas dispersion models to predict chemical concentration.

A powerful post-processor that enables analysis and visualization of data in time series, 2D and 3D contour plots, and 3D isosurface and plane views; exports results to Google Earth and GIS software; supports post-processing tasks like adding/subtracting model runs or adding background concentrations.

Modeling tools used to support permit applications, compliance demonstrations, emergency response planning, and impact and feasibility assessments related to accidental releases.

A companion program to BREEZE AERMOD that provides a clear graphical display of building downwash effects of AERMOD’s BPIP pre-processor.

Displays a variety of meteorological data formats in tabular and graphical formats and can create wind roses for user-defined periods.

An add-on tool for BREEZE ESP+ modules that automatically combines emissions from all tank and non-tank sources at a site and calculates the monthly rolling sum, including speciation.

A highly flexible and expandable GIS-based analysis platform for conducting multi-pathway human health risk assessments combining tools, databases, GIS functionality, and fate and transport and exposure modeling equations.

Computes vulnerability parameters of structures and human body components resulting from explosion impacts, usable in BREEZE ExDAM HExDAM and VExDAM modules.

Meteorological data processing software used in regional air quality modeling services.

Predicts LNG and LFG vaporization rates and downwind vapor concentrations to evaluate fire/explosion risk, and predicts thermal radiation from LNG and LFG pool and jet fires.

A configurable environmental, health, and safety management software platform tailored to meet specific regulatory, permitting, and ESG reporting requirements across multi-state, multi-regulatory networks.

Post processing and data visualization software used in regional air quality modeling services.

A worst-case screening model based on the ISCST3 air quality dispersion model used to analyze single source release scenarios over simple or complex terrain.

A system for emissions processing used in regional air quality modeling services.

Photochemical grid modeling software used in regional air quality modeling services.

An emissions processing tool used in regional air quality modeling services.

Data analysis software used in regional air quality modeling services.

A cloud-based enterprise-wide EHS platform that supports environmental management, health & safety workflows, sustainability, and chemical management with regulatory compliance and reporting capabilities.

A cloud-based SaaS enterprise EHS and ESG technology platform combining AI and machine learning with EHS and ESG expertise to drive continuous improvement.

A model used for emissions processing in regional air quality modeling services.

Includes the CAL3QHC, CAL3QHCR, and CALINE4 models to predict air quality impacts from motor vehicles on roadways.

Support services for Leak Detection and Repair programs to comply with air quality regulations.

PHA Central™ is a revolutionary software solution that allows companies to leverage the knowledge and value of their PHA data for better investment in risk mitigation and more consistent risk analysis.

Consulting and compliance support services for facilities subject to 40 CFR Part 61, Subpart FF, including applicability determination, compliance strategy, audits, and regulatory overlap assistance.

Service to assist companies in complying with the Chemical Facility Anti-Terrorism Standards (CFATS).

Service to assist companies in complying with regulations related to per- and polyfluoroalkyl substances (PFAS).

A SaaS solution that helps manage EHSQ and ESG related business processes effectively and efficiently, coupled with Trinity's expert planning, implementation, and support for customized compliance and performance management.

An AI-enabled Life Cycle Assessment tool and service that accelerates LCA delivery, provides transparent and auditable environmental impact assessments, and supports strategic decision-making aligned with ISO standards and regulatory frameworks.

A customized fence line monitoring system integrating advanced open path technology, point monitoring, and meteorological systems to provide real-time emissions assessment at petroleum refineries and industrial sites.

Service to help companies comply with the Toxic Substance Control Act (TSCA) and related reporting requirements.

Service for reporting toxic chemical releases under the Toxic Release Inventory program.

Service to prepare SPCC plans that address secondary containment and controls to prevent and mitigate oil spills, including inspection, monitoring, and spill response procedures.

Permitting service to help clients obtain individual and general NPDES permits and pretreatment discharge permits, including program audits, water sampling, and development of electronic data systems for discharge monitoring reports.

A web-based environmental management information system (EMIS) focusing on air emissions inventories, water quality, and waste management, included in the Intelex suite.

Service to help companies comply with California Proposition 65 chemical regulations.

Service to develop facility-specific Stormwater Pollution Prevention Plans for industrial and construction activities covered by stormwater permits.

A service provided by Trinity Consultants' Process Safety team to support Independent Protection Layers (IPLs) throughout their lifecycle, ensuring compliance with industry, corporate, and facility requirements.

Service for reporting under the Emergency Planning and Community Right-to-Know Act (EPCRA) Tier II and Safety Data Sheets (SDS).

Expertise in aquatic ecology, fisheries biology, benthic invertebrate ecology, water and sediment quality, toxicology, and environmental behavior, transport and fate of chemicals, including baseline studies, regulatory approvals, monitoring program design, and impact assessments.

Service to conduct wetlands assessments and complete Section 404 wetlands permitting including delineation, permit application, alternatives analysis, and mitigation planning.

Services supporting water quality regulations including monitoring and sampling plan development, various water and sediment sampling, inspections, laboratory analysis contracting, and data management.

An AIHA-accredited laboratory specializing in ultra-sensitive detection of active pharmaceutical ingredients (APIs) in workplace air and surfaces, supporting pharmaceutical and life science companies in exposure assessment, containment verification, and cleaning validation.

Trinity Consultants provides climate data reporting and disclosure services to help clients with CDP disclosure by combining expertise in quantifying air emissions and climate change expertise.

A comprehensive service offering project management, design engineering, automation, commissioning, qualification & validation (CQV), process engineering, and process development for biopharmaceutical manufacturing.

The CERTS application provides a mechanism to track and document activity, satisfying the OSHA PSM Operator Refresher training requirement.

Software solution for commissioning and facility management to optimize building system performance.

The ARTS system aggregates data from multiple departments into a single user interface for quick review and evaluation.

Services for managing refrigerants including ozone-depleting substances (ODS) and hydrofluorocarbons (HFC).