NANOVIDA

Full integration on one board Mega R3 ATmega2560 and WiFi ESP8266 with memory 32Mb. All of the modules can work together or separately and have their own pinout headers.

An Arduino-compatible development board specially crafted for building projects, featuring built-in LEDs, a programmable push button, and a piezo buzzer for out-of-the-box experimentation and troubleshooting.

Pro Mini ATMEGA328P 5V/16M Blue standard version microcontroller development board.

CT-UNO-SE Arduino compatible development board.

Cytron's Arduino Proto Shield is designed for low cost and to provide maximum prototyping area within Arduino's dimension, featuring stackable headers and onboard components.

The Arduino Pro Mini is a microcontroller board based on the ATmega328, designed for semi-permanent installation in objects or exhibitions.

A tiny Arduino-compatible microcontroller board featuring the ATmega32U4, running at 16MHz and 5V with 4 channels of 10-bit ADC, 5 PWM pins, and 12 DIOs.

Maker UNO is an Arduino Compatible board specially designed to simplify building projects with built-in LEDs, buzzer, and button for easy coding, electronics, and troubleshooting.

Educational kit designed for simplifying Arduino for education and beginners.

The Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful.

A custom microcontroller platform and Arduino clone based on the ATmega644 MCU with improved analog and digital I/O, beefier power regulation, and additional power headers.

An expansion shield designed to facilitate easy connection between Arduino Nano and various other devices, expanding the Nano controller to link devices in a simple and trouble-free manner.

Zio is a new line of open sourced, compact, and grid layout boards, fully integrated for Arduino and Qwiic ecosystem, designed for wearables, robotics, and small-space limitations.

Starter kit centered around the Cytron Uno microcontroller board.

A low-cost version of an Arduino UNO compatible board using the CH340 as USB to UART chip, fully compatible with Arduino UNO R3.

The Arduino Compatible Board for the Classroom designed to be easy to teach and beginner-friendly for students with built-in LEDs, piezo buzzer, programmable push button, and breadboard.

The Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. This version of the board comes with a USB micro B receptor.

A custom watch that displays time, date, and temperature in binary, driven by an Atmega328P MCU and DS3231 RTC.

Iduino Yun cloud is an ideal IoT device for Internet of Things projects and a compatible/replacement product for Arduino Yun, combining an ATmega32u4 microcontroller with an Atheros AR9331 processor running OpenWrt.

An Arduino compatible development board based on the STM32F103C8T6 ARM Cortex-M3 microcontroller, featuring pre-soldered header pins and higher performance than the Arduino UNO.

The Arduino MKR WIFI 1010 is an IoT development board equipped with an ESP32 module made by U-BLOX, featuring low power consumption, Wi-Fi, Bluetooth, and secure communication using SHA-256 encryption.

A reflow oven shield designed for the GAFFORDuino to enable closed-loop control of reflow temperature profiles using a toaster oven.

Kit featuring IoT WiFi and temperature sensing capabilities for Arduino compatible projects.

A modern open-source hardware replica of the classic 1976 KIM-1 computer, powered by an Arduino Pro Mini and built with commonly available components.

Comprehensive sensor kit containing 37 different sensors for Arduino projects.

Custom circuit design shield for Arduino featuring standard pinout, reset button, ICSP connector, and SMD/through-hole footprints.

A construction base for prototyping of electronics consisting of a perforated block of plastic with spring clips.

A plug-and-use prototyping base board designed to ease prototyping using the NodeMCU V3 (Lolin) board. It extends the GPIO and power pins and features an on-board 5V voltage regulator with a DC barrel jack for power input.

A custom designed user interface board that fits on top of an existing embedded design board stack, providing hardware and software user interface features for educational purposes.

A serial programmer offering USB 2.0 and USB 3.0 compatibility with in-circuit connector and support for low voltage devices down to 1.2V.

An external USB MIDI controller project for SDR Console software using an Arduino UNO R3 board and passive components like rotary encoders, potentiometers, and buttons.

A dual-axis motor and sensing shield for the GAFFORDuino644 based around the L298N H-bridge driver, providing closed-loop control with current sensing, quadrature decoding, and acceleration data.

Modular microcontroller development kit featuring an ESP32 core, display, and stackable block design.

An open-source firmware and development kit based on the ESP8266 WiFi SoC and ESP-12E module, designed to prototype IoT products using Lua scripts or the Arduino IDE.

UC00C is a low cost alternative to the FTDI USB to UART converter, supporting both 3.3V and 5V systems. It is used for programming, development, and debugging between a computer and a microcontroller.

PSoC 5LP prototyping kit featuring the CY8C5888LTI-LP097 ARM Cortex-M3 based microcontroller.

A USB universal serial ISP programmer used for reading and writing 8-pin and 16-pin chips commonly found on computer motherboards, laptops, LCDs, routers, and home appliances.

A simple keypad with 4 digit access codes designed to allow quick access to the garage when a remote is not at hand.

An open-source FPGA development board featuring a MachXO2-1200 FPGA chip and compact dimensions.

A board that mechanically supports and electrically connects electronic components using conductive tracks or pads.

An open-source FPGA development board featuring a MachXO2-256 FPGA chip from Lattice Semiconductor.

An open-source FPGA development board incorporating an ICE40LP8K FPGA chip with a pre-programmed USB bootloader.

A 3rd party custom CPU made specifically for UP plus, UP mini, and Cetus 1/2 and 3 printers that transforms the printer into an open source machine running Smoothieware firmware and native GCODE.

An open-source FPGA development board featuring an LFE5U-25F FPGA chip.

A brand of stripboard made of copper strips on an insulating bonded paper board for constructing electronic circuits.

Maker Drive is a beginner-friendly, compact H-bridge DC brushed motor driver designed to simplify prototyping and mobile robotics with features like reverse polarity protection, test buttons, indicator LEDs, and a buck-boost regulator.

4-channel 16-bit analog-to-digital converter module communicating via I2C.

An application-specific parallel-core processor for motor control that consists of an Advanced Motor Controller (AMC) processor and a MCS51-compatible MCU processor.

A newly developed replacement PCB featuring an STM8S105 microcontroller designed to replace the original MK3870N microcontroller in Philips 22AH106 and 22AH799 devices, enhancing functionality and adding new features.

The USB-type programmer that supports the RS-ST servo enables adjustment capabilities for a wide range of RWD drift users from beginner to advanced. Allows setting up 5 items: Speed, Torque, Boost, Deadband, and Curve.