Prototype tunable fiber-based light source (proof-of-concept)
Research-stage fiber-optic parametric light source employing nonlinear four-wave mixing and resonant-cavity concepts to generate spectrally narrow, tunable beams for nonlinear imaging and spectroscopy.
SILIQUAN
Nowatorskie podłoża SERS do szybkiej i dokładnej analizy w naukach analitycznych, takich jak farmacja, kryminalistyka, medycyna, oparte na chropowatej powierzchni z nanocząsteczek srebra lub srebra-złota, zwiększające czułość spektroskopii Ramana.
fluorescencyjne nanoobiekty marki SILIQUAN
Nanoobiekty zbudowane z niewielkich rdzeni fluorescencyjnych otoczonych warstwą transparentnej krzemionki o różnej grubości, stosowane w zaawansowanych technikach mikroskopowych takich jak spektroskopia korelacji fluorescencyjnej.
Portable Raman Spectrometer
Spectrometer equipped with 785 (50 mW) and 532 (420 mW) nm laser light excitation sources, spectral acquisition range 150-3350 cm-1 with 4.5 cm-1 resolution at 912 nm, includes video microscope with XYZ manual positioning stage probe holder.
Femtosecond Raman spectrometer IPS PAS model FSRS No. 1
A device built at the IPC PAS for Raman spectral resolution measurements with a resolution <100 fs, using forced Raman scattering.
Renishaw inVia Raman spectrometer
The Renishaw inVia Raman spectrometer is equipped with four excitation light sources (633nm, 785nm, 514nm, and 325nm) and coupled with the NT-MDT atomic force microscope (AFM) to allow simultaneous recording of Raman spectra and AFM images of samples. It supports Raman spectra recording for liquid and solid samples and thin molecular films on solid substrates.
eqcm static
Electrochemical quartz crystal microbalance for static measurements using a 10 MHz quartz resonator, offering four times greater sensitivity and detection but with a four times lower maximum load.
EQCM 5410 (static 5 MHz)
Electrochemical quartz crystal microbalance for static measurements using a 5 MHz quartz resonator, characterized by higher maximum mass load but lower sensitivity and detection.
XPS Spectrometer
The spectrometer has considerable control and measurement automation. It is equipped with a hemispherical analyser with a 5-channel detector and an X-ray source without a monochromator. It includes a preparation chamber with gas lines and a new sample transmission system with sample carriers produced by PREVAC. The XPS technique is useful in determination of chemical composition of the surface of solid materials with resolution of a few or several nm.
XPS Spectrometer CLAM2
CLAM2 is a hemispherical kinetic electron energy analyzer providing X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES) analysis for surface chemical composition determination with nanometer resolution. It includes an argon ion gun for surface depth profiling and cleaning.
BacterOMIC AST
An analytical device developed to provide comprehensive and precise data on bacterial antibiotic resistance, enabling doctors to quickly determine the susceptibility of bacteria to clinically important antibiotics.
system PCR|ONE
W pełni zautomatyzowany system do najszybszego wykrywania bakterii i wirusów na świecie, umożliwiający wykrycie do 20 różnych patogenów oraz genów oporności lekowej.
electrochemical quartz crystal microbalances EQCM 5710 and EQCM 5610
Electrochemical quartz crystal microbalances for simultaneous piezoelectric microgravimetry and electrochemistry measurements. EQCM 5710 operates under stagnant-solution conditions and allows simultaneous voltammetric, chronoamperometric, chronocoulometric, or galvanostatic measurement with frequency and dynamic resistance measurement. EQCM 5610 features a flow-through quartz crystal holder suitable for flow analytical techniques like FIA and micro-bore column HPLC.
A flexible platform for a surface-enhanced Raman effect
A flexible platform made of PET covered with an ITO layer and a metallic active layer (gold, silver) that serves as a SERS platform with high enhancement factor, allowing detection and identification of substances and microorganisms such as bacteria and cancer cells using surface-enhanced Raman spectroscopy.
batch photoreactor with LED lighting and a controlled atmosphere
A batch photoreactor developed at the Institute of Physical Chemistry providing repeatable conditions for experiments with linear light source, separation from external light, and heat dissipation housing.
MultiClamp 700B / DigiData 1440
Patch-clamp amplifier assembly enabling current measurements in the range of ±200 pA with low noise, including MultiClamp 700B amplifier, DigiData 1440 data acquisition and control device, and pCLAMP 10 software for voltage/current control and measurement.
Platforma SERS z nanocząstkami metalu otrzymana metodą elektrochemiczną
Powierzchnia pokryta nanocząstkami metalu o rozmiarach 50-400 nm, uzyskana prostą techniką elektrochemiczną z kontrolą temperatury roztworu elektrolitu, służąca do pomiarów powierzchniowo wzmocnionego efektu Ramana (SERS).
Femtosecond fluorescence spectrometer
The femtosecond fluorescence spectrometer is a device built at the Institute of Physical Chemistry, designed to measure time-resolved fluorescence spectra with a resolution of less than 100 fs using femtosecond lasers.
Platform for the detection and/or identification of microorganisms, especially bacteria, using the surface-enhanced Raman (SERS) technique
A platform comprising a fabric filtering medium with a dense weave covered with a metallic layer, designed for detecting and identifying microorganisms, particularly bacteria, using the surface-enhanced Raman technique (SERS). The filter fabric is non-cored with warp wires of different diameters and made of material with thermal conductivity not lower than 10 W·m-1·K-1, allowing retention of biological material on the wire surface.
Platforma do badań substancji chemicznych oraz mikroorganizmów techniką wzmocnionej powierzchniowo spektroskopii Ramana
Platforma do analizy wzmocnionej powierzchniowo spektroskopii Ramana (SERS) bazująca na warstwie nanowłókien polimerowych wykonanej techniką Forcespinning, o wysoce rozbudowanej powierzchni, pokrytej złotem.
ReactoReQ
The photoreactor from the IPC PAS designed for chemical reactions in gas, liquid, suspension, and on films, featuring a glass vessel inside a metal housing with controlled light intensity and heat dissipation.
Axopatch 200B
Axopatch 200B – a microelectrode amplifier designed for low-noise patch-clamp recordings. It employs capacitor-feedback technology and active headstage cooling for single channel measurements.
fotoreaktor wsadowy z oświetleniem LED i kontrolowaną atmosferą
Fotoreaktor wsadowy opracowany w Instytucie Chemii Fizycznej PAN, zapewniający powtarzalne warunki prowadzenia eksperymentów z liniowością źródła światła względem reaktora, odseparowaniem od światła zewnętrznego oraz obudową ułatwiającą odprowadzenie ciepła.
EQCM 5610 (flow)
Electrochemical quartz crystal microbalance designed for detection in analytical flow techniques such as FIA and HPLC with columns not exceeding 1 mm in diameter.
Jasco V-570
The V-570 is a versatile UV / VIS / NIR high-resolution spectrophotometer that offers unique research capabilities for substances in solutions and powders, including organic compounds and superconducting materials.
Edinburgh spectrofluorimeter FS 900 CDT, FL 900 CDT
The Edinburgh spectrofluorimeter with two possible geometries - L and T measures stationary fluorescence spectra and fluorescence excitation of 200-900 nm; equipped with polarizers; Time-resolved measurements are possible - measurement of fluorescence life in the range from ns to s.
Autolab electrochemical system
Electrochemical system for electroanalytical measurements, equipped with expansion cards like bipotentiostat, microelectrode unit, frequency response analyzer for EIS measurements, and driven by dedicated software.
CH Instruments 900B
The CHi 900B scanning electrochemical microscope enables studies of processes at electrolyte interfaces, determination of kinetic and mass transport parameters, and mapping of chemical activity. It includes a bipotentiostat for typical electrochemical measurements and a microscope probe positioned in XYZ directions with high resolution.
ESPRIT SPR instrument
Double-channel surface plasmon resonance (SPR) instrument equipped with open-structure electrochemical cuvette and autosampler, used for studying kinetics and thermodynamics of analyte-receptor interactions, with potentiostat/galvanostat for simultaneous current and SPR signal measurements.
PhotochemicalReactor model: RQ125
The RQ125 is a high-performance apparatus for chemical reactions in aqueous and organic solutions initiated by ultraviolet radiation with temperature control and radiation intensity measurement.
P/ACE MDQ Capillary Electrophoresis System
P/ACE MDQ capillary electrophoresis system with a diode array detector (DAD) and 32 Karat control software. The apparatus can be used for analytical separation of mixtures of ionized substances.
UV-vis Recording Spectrophotometer Model UV2501PC
UV-vis spectrophotometer equipped with reflection mode, integrating sphere accessory, and linear dichroism attachments for UV-vis spectroscopy and spectro-electrochemistry studies on thin films.
UVISEL spectroscopic ellipsometer
Spectroscopic ellipsometer working in spectral range 245 to 2100 nm for determining thickness and optical parameters of single- and multilayer organic and inorganic films, with automated sample stage for mapping.
BI-200SM
The BI-200SM allows for precise measurements of the intensity of scattered laser light in the angle range of 20 - 155° at temperatures between 5°C and 70°C. From the obtained autocorrelation functions, the system provides detailed analysis.
Vertex 80v FT-IR spectrometer
Fourier Transform Infrared Spectrometer by Bruker Inc., USA, equipped with PMA50 accessory for Langmuir-Blodgett IR spectra and PM-IRRAS technique, also capable of classical IR transmission spectra of KBr pellets and measurements under low pressure to reduce interference from gases.
170SX FT-IR spectrometer
FT-IR spectrometer used with Monolayer/Grazing Angle Accessory for IR spectra recording of floating Langmuir films or films transferred onto solid substrates.
8712E RF Network Analyzer
RF Network Analyzer used for analyzing visco-elastic properties and mass changes of film-coated quartz crystal oscillators under stagnant and flow-through solution conditions, compatible with Autolab electrochemistry system.
Thermo Electron Microlab 350
The Thermo Electron Microlab 350 microanalyzer is designed to study the chemical composition of surfaces of solids with guaranteed analysis parameters, allowing examination of objects with a width of several dozen nanometres and a thickness of several atomic monolayers (~ 1 nm) characteristic of Auger electron spectrometry. It enables visualization of the surface, linear decomposition of elements, and profiling of their concentrations with a resolution of 0.5-1 nm and analytical sensitivity of fractions of atomic %. It is also equipped with an X-ray gun without monochromator for XPS measurements.
Multi vessel
The KSV NIMA Dip Coater is designed to deposit layers of materials in a controlled and repeatable way. It is possible to deposit films of various thicknesses, from monolayers to multilayered structures.
rotating ring-disk electrode Model RRDE-3A
Rotating ring-disk electrode used for voltammetric and chronoamperometric measurements on films.
LabStar glove box
Glove box for preparation of air- and moisture-sensitive samples and electrochemical experiments in anaerobic and moisture-free environment.
PC-10
The Narishige PC-10 capillary puller enables the pulling of glass capillaries with an outer diameter of 1mm. The device allows for the fabrication of microelectrodes.
MultiMode microscope
Microscope configured for atomic force microscopy (AFM), scanning tunneling microscopy (STM), magnetic force microscopy (MFM), electric force microscopy (EFM), and other imaging modes, equipped with electrochemical mini cells and optical CCD camera imaging for precise positioning and visualization during experiments.
ASAP 2020
The ASAP 2020 is an automated device for porosimetric measurements and determination of the surface area of porous materials, using the gas sorption technique. An option to determine the microporous structure is available.
Nikon A1-R Confocal Microscope
The Nikon A1 confocal microscope is a versatile measurement device used for confocal imaging and various fluorescence spectroscopy techniques, equipped with PicoHar 300 fluorescence spectroscopy correlation spectroscope and avalanche photodiode detectors. It supports measurements such as Fluorescence Recovery After Photobleaching, Fluorescence Correlation Spectroscopy, Fluorescence Cross-Correlation Spectroscopy, Fluorescence Lifetime Correlation Spectroscopy, and Fluorescence Lifetime Imaging, with optional table-top climate chamber for temperature-dependent measurements.
DSR_λ
The DSR_λ is a microprocessor-controlled refractometer designed to measure refractive indices in liquid substances, regardless of their transparency, viscosity or colour. The instrument consists of a measuring head and control unit.
rectangular trough Model BAM 601
Trough for preparation and investigation of mono- and multilayer Langmuir films floating on aqueous subphase solutions, with surface pressure and surface potential sensors and Brewster angle microscope for imaging.
Chromatographic standards
Standards for chromatographic and refractometric analysis produced and stocked by CHEMIPAN.
plasma cleaner Model ZEPTO
Plasma cleaner generating oxygen, argon, or mixed plasma for cleaning surfaces prior to film preparation and deposition.
gradient HPLC system composed of two pumps Model 6000 of Waters
A gradient HPLC system used for examining purity of samples for film preparation, equipped with two pumps Model 6000 of Waters and a homemade gradient controller, UV-vis detector type SPD10A of Shimadzu or a homemade electrochemical detector.
Nima D1L linear dipper
Device for vertical transfer of Langmuir films onto solid substrates using Langmuir-Blodgett technique.
unique apparatus
An assembly for studying the structure of powder materials by diffractometric methods with simultaneous analysis of the gas atmosphere during chemical reactions by mass spectrometry.
MultiMode 8
The MultiMode 8 enables work in AFM (Atomic Force Microscopy), STM (Scanning Tunneling Microscopy), MFM (Magnetic Force Microscopy), EFM (Electric Force Microscopy), and more. The microscope is also equipped with additional features.
Nikon C1 Confocal Microscope
The Nikon C1 Confocal Microscope is a device for measuring fluorescence correlation using spectroscopy. It is equipped with a PicoHarp 300 fluorescence correlation spectroscopy module from PicoQuant and two detectors based on avalanche photovoltaics. The microscope is built into a chamber that allows for the control of measurement temperature and atmosphere (gases: nitrogen, CO2). It is possible to mount an environmental control chamber to measure as a function of temperature.
Aligner
The Aligner is a device used to prepare lithographic systems. It allows the preparation of systems with an accuracy of up to 0.5 μm.
DSC 3
Thanks to its modular design, the DSC 3 as part of the METTLER TOLEDO Thermal Analysis Excellence Line is the best choice for manual, from quality assurance and production through to research and development.
prototype
The glass ultra-high vacuum apparatus enables the measurement of the actual surface area by means of xenon adsorption with an accuracy of single cm2. It is designed for measuring small surfaces.
Pheromones for monitoring pest numbers - forest, orchard and horticultural
Modern agents and traps based mainly on semiochemicals for monitoring pest populations in forests, orchards and horticultural crops, developed and manufactured by CHEMIPAN.