Dräger

Area monitoring transmitters using ultrasonic acoustic sensors to detect pressurized gas leaks early by identifying ultrasonic signatures rather than gas concentration.

Hand‑held detectors and personal monitors for the detection of specific toxic and flammable gases and vapors in industrial and emergency-response contexts.

Range of respiratory protection products including half- and full-face respirators, filter cartridges with standardized fittings, powered filter units and short-term escape devices for toxic atmospheres.

Combined fire and industrial escape hood for respiratory protection against toxic industrial gases, vapours, particles, carbon monoxide, combustion gases and smoke; for single use with a usage duration of at least 15 minutes.

Protection against toxic industrial gases, vapors, particles and fire-related gases with ABEK CO P3 filter. Approved according to EN 403:2004 and DIN 58647-7.

Escape hood in three versions: Industrial or fire escape hood, or both versions in one. Provides at least 15 minutes of escape time according to EN 403:2004 and/or DIN 58647-74. Different packaging options available.

Combined fire and industrial escape hood for respiratory protection against toxic industrial gases, vapours, particles, carbon monoxide, combustion gases and smoke; for single use with a usage duration of at least 15 minutes.

Filterfluchtgerät for emergency escape breathing protection.

Industrial escape hood in hard case packaging providing at least 15 minutes of escape time with protection against toxic industrial gases, vapours, and particles.

Fire escape hood in hard case packaging providing at least 15 minutes of escape time with protection against fire-related gases and particles.

Fire escape hood in compact cardboard box packaging providing at least 15 minutes of escape time with protection against fire-related gases and particles.

Protection against toxic fire-related gases, vapors and particles with CO P2 filter. Approved according to EN 403:2004 for fire escape hoods and tested for H2S.

Protection against toxic industrial gases, vapors and particles with NIOSH approved filter. Available in Soft Pack packaging.

Half mask escape device equipped with multi-gas ABEK15 filter, providing minimum 15 minutes escape time, protection against toxic industrial gases according to DIN 58647-7.

Fire escape hood in a flame-retardant holster. Developed for fire rescue teams for victim rescue. System approved with Dräger breathing apparatus according to EN 137:2006, Type 2.

Half mask escape device equipped with a multi-gas filter. Vacuum sealed in an aluminum barrier bag for diverse climate zones. Provides a minimum of 15 minutes escape time. Protection against toxic industrial gases.

Filterfluchtgeräte for emergency escape breathing protection.

Filterfluchtgerät for emergency escape breathing protection.

Mouthpiece/nose clip escape device with multi-gas filter. Vacuum sealed in an aluminum barrier bag for diverse climate zones. Provides at least 15 minutes of escape time. Protection against toxic industrial gases.

Extra small escape device with mouthpiece/nose clip and multi-gas ABEK filter, providing 10 minutes protection against toxic industrial gases, DIN 58647-7 approved, suitable for spectacle and beard wearers.

Filterfluchtgerät for emergency escape breathing protection.

Training unit designed for users to practice use of the PARAT 3200 mouthpiece escape device. Includes an empty filter dummy that can be hygienically cleaned. Clearly marked as 'For Training Only'.

Training hood for practice use with filter dummy. Available in Hard Case, Soft Pack and Single Pack.

Extra small escape device with mouthpiece / nose clip and multi-gas filter. Vacuum sealed in an aluminum barrier bag for diverse climate zones. Provides 10 minutes of protection against toxic industrial gases.

Carrying option suitable for recurring operations where a device is quickly carried along and the user does not have a belt. Can be assembled on the belt clip of the PARAT 3000.

Carrying option that functions as a carabiner hook and provides drop safety for the unit. Can be hooked onto belt loop and assembled on the belt clip of the PARAT 3000.

The Dräger Saver CF is a constant flow Emergency Escape Breathing Apparatus designed for safe and effective escape from hazardous environments. It features a hood-based design with automatic operation and can be used with minimal training.

Druckluftfluchtgerät for emergency escape breathing protection.

Multi-Gas Detector that accurately detects combustible gases, O2, CO, NO2, SO2 and H2S for industrial and refinery applications.

1- to 7 gas detection device for clearance measurement detection of toxic and combustible gases as well as vapours and oxygen

The X-am 2600 multi-gas detector measures flammable gases, oxygen, carbon monoxide and hydrogen sulphide. It is optimized for personal monitoring in diffusion mode and offers live data transmission and powerful fleet management via Dräger Gas Detection Connect software.

The X-am® 5800 multi-gas detector measures up to five gases and is equipped with a shock-resistant CatEx SR sensor. It is designed for personal air monitoring and offers live data transmission and powerful fleet management via Dräger Gas Detection Connect software.

1 to 4 gas detection device for clearance measurement detection of flammable gases and vapours as well as O2, CO, H2S, NO2 and SO2

1 to 4 gas detection device for personal air monitoring detection of flammable gases and vapours as well as O2, CO, NO2, SO2 and H2S Live monitoring with Gas Detection Connect possible

Portable single-gas detector for HF, HCl, H2O2, or hydrazine for personal air monitoring

The Dräger X-am 5000 is a portable multi-gas detector designed for personal air monitoring. It detects 1 to 5 gases including combustible gases, vapors, oxygen, and toxic gases such as CO, H2S, NO2, and SO2.

The Dräger X-am 5600 is a small, robust, and water-tight multi gas detection device for personal air monitoring, capable of measuring 1 to 6 gases including explosive, combustible, toxic gases, vapors, and oxygen.

External pump for Dräger X-am® 2500/2800 and X-am ® 5000/5600/5800 for clearance measurement Automatically switches on when connected to a running X-am® device

A professional industrial escape hood with bright yellow and matt black color scheme for visibility.

A basic industrial escape hood with luminescent and matt black color scheme.

Imaging based explosion proof flame detector with a colour CCTV camera. Digital image processing and advanced algorithms for flame interpretation. Extended field of view and fewer false alarms.

Uses digital image processing for extended field of view. Fewer false alarms compared to conventional detectors.

Uses triple IR sensor for hydrocarbon fire detection. High reliability, low false alarm rate.

Specially developed for hydrogen fire detection. Triple IR sensor, robust and weatherproof. High performance and low false alarm rate.

Uses UV and IR sensors for reliable detection of hydrocarbon-based fires. High performance and low false alarm rate.

Ergonomic design with adjustable three-position backplate for unrestricted movement. Integrated Dräger Sentinel 7000 for real-time monitoring and alerts. Quick cylinder changes with QuickConnect adapter.

Professional self-contained breathing apparatus for firefighting with advanced ergonomics and a wide range of configurable options.

Closed-circuit breathing apparatus providing up to four hours of breathing air in toxic atmospheres.

Professional self-contained breathing apparatus for firefighting. Wide range of configurable options for comfort and versatility. Adheres to NFPA standards.

Ergonomic design with adjustable three-position backplate for unrestricted movement. Integrated Dräger Sentinel 7000 for real-time monitoring and alerts. Quick cylinder changes with QuickConnect adapter.

High-performance self-contained breathing apparatus for firefighting. Offers best in class ergonomics and is one of the lightest weight breathing apparatus. Tailored fit allows for exceptional mobility.

Dräger's intrinsically safe powered air-purifying respirators (PAPRs) are utilized in various industries and environments where there is a risk of exposure to hazardous substances, gases, vapours, or particulates that could ignite or cause explosions in the presence of certain conditions such as flammable gases or combustible dust.

Dräger's intrinsically safe gas detectors are designed to operate safely in environments where flammable gases, vapours, or combustible dust may be present.

Lightweight powered air purifying respirator (PAPR) for particulate hazards with outstanding ergonomics and no breathing resistance. Versatile components for easy customization and intuitive design optimized for easy cleaning.

Partikelfiltrierende Halbmaske for industrial respiratory protection.

Partikelfiltrierende Halbmaske for industrial respiratory protection.

Einfilter Halbmaske for industrial respiratory protection.

Zweifilter Halbmaske for industrial respiratory protection.

Einfilter Halbmaske for industrial respiratory protection.

Zweifilter Halbmaske for industrial respiratory protection.

Robust PAPR for particulate & gas hazards. High wearing comfort without breathing resistance. Versatile components for easy adaptation.

Einfilter Vollmaske for industrial respiratory protection.

Powered air purifying respirator blower unit designed for environments with flammable or combustible substances and potentially explosive atmospheres, intrinsically safe with ATEX certification for Ex zones 1, 2, 21, and 22.

Lightweight powered air purifying respirator (PAPR) for particulate hazards with outstanding ergonomics and no breathing resistance. Versatile components for easy customization and intuitive design optimized for easy cleaning.

A powered air purifying respirator (PAPR) providing respiratory protection with powered air flow to reduce breathing resistance.

High comfort single-filter full face mask with standard thread connection Rd40, protecting the respiratory tract and eyes, with a wide range of Dräger X-plore Rd40 filters for various applications.

Disposable N95 particulate respirator with flat-folded design for space-saving storage and easy transport. Combines low breathing resistance and high filter performance.

FFP with flat-folded design for space-saving storage and easy transport. Effective protection against fine dust and solid and liquid particles. Available in all three EN protection classes FFP1, FFP2, FFP3.

A full-face respirator mask designed to provide proper respiratory protection with instructions on operation, filter use, and cleaning.

FFP with pre-formed mask body for comfortable wearing and easier speech. Effective protection against fine dust and solid and liquid particles. Available in all three EN protection classes FFP1, FFP2, FFP3.

High-quality single-filter full face mask with standard thread connection Rd40, protecting the respiratory tract and eyes, with a wide range of Dräger X-plore Rd40 filters for various applications.

Twin-filter half mask with Dräger specific bayonet connection. With comfortable Soft-TPE or skin-friendly, hypoallergenic DrägerFlex material. Wide range of Dräger X-plore Bayonet filters for various applications.

Gas filter for respiratory protection

Low-cost single-filter full face mask with standard thread connection Rd40, suitable for environments requiring increased respiratory and eye protection, with a wide range of X-plore Rd40 filters for various applications.

Respirator mask model X-plore 9310

Basic application set for X-plore 8700 respirators

FFP3 rated respirator mask

Air line respirator designed for light-duty industrial applications providing comfortable and reliable respiratory protection with a unique safe-flow pressure reducer and auto-test feature.

Air line respirator designed for light-duty industrial applications providing comfortable and reliable respiratory protection with a unique safe-flow pressure reducer and auto-test feature.

Disposable N95 particulate respirator with three-part folding design for increased breathing space. Available in two sizes, meets ASTM F3407 standards. Combines ease of use, exceptional comfort and fit.

Disposable N95 particulate respirator with pre-formed mask body for comfortable wearing and easier speech. Protects against high levels of dust exposure while keeping breathing resistance low. Various sizes available.

Designed for light duty industrial applications. Provides comfortable and reliable respiratory protection without breathing resistance. Compatible with a wide variety of X-plore 8000 headpieces.

Base component for Dräger X-plore respirators

Designed for light duty industrial applications. Provides comfortable and reliable respiratory protection without breathing resistance. Compatible with a wide variety of X-plore 8000 headpieces.

Filter series with standard thread connection Rd40 according to EN 148-1. Robust aluminium housing with long life time. Suitable for use with Rd40 threaded half and full face masks.

Long-life rechargeable battery for X-plore 8700 respirators

Welding visors for combination with Dräger X-plore® 8000 system providing reliable eye, face and respiratory protection during welding operations. Shade states from level 4 - 13 for welding, cutting and grinding.

Innovative filter series with Dräger specific Bayonet connection. Safe, quick bayonet fastener for easy operation. Suitable for use with Dräger X-plore® 3000 half masks.

Independent from gas and power supply, high-performance ICU ventilator with intuitive and simple operation, user-friendly interface, and comprehensive range of ventilation modes.

Turbine-driven ventilation with sophisticated ventilation modes and intuitive, simple operation with a large color touch screen.

High non-invasive ventilation performance with automatic leak compensation. Independent from gas and power supply with intuitive and simple operation.

Mobile breathing air supply system ideal for chemical tank cleaning, toxic spillages, or offshore installations, using one or two compressed air cylinders of up to 50 liters with air supply by trolley-mounted cylinders and hose reel.

Mobile breathing air supply system ideal for chemical tank cleaning, toxic spillages, or offshore installations, using up to four compressed air cylinders of up to 12 liters with air supply by trolley-mounted cylinders and hose reel.

Sauerstoffselbstretter for emergency oxygen self-rescue.

Sauerstoffselbstretter for emergency oxygen self-rescue.

Short duration and emergency escape unit. Hip-mounted for greater freedom of movement. Ideal for use in confined space entry applications.

Supplied Airline Respirator. Hip-mounted for greater freedom of movement. Can be used with up to 300 feet or 12 hose length sections from the air source.

Combination with Dräger X-am 5000, 5100, 5600 or 5800 Measures up to six gases Extensive area monitoring thanks to fenceline of up to 25 devices Option for permanent power supply in explosive areas (zone 0)

In combination with Dräger X-am 5000, 5100, 5600 or 5800 Measures up to six gases Extensive area monitoring thanks to fenceline of up to 25 devices

High-performance self-contained breathing apparatus for firefighting. Offers best in class ergonomics and is one of the lightest weight breathing apparatus. Compatible with Dräger FireGround.

Self-contained breathing apparatus for basic applications in Industry and Fire Services. Combines comfort with exceptional pneumatic performance.

Professional self-contained breathing apparatus for firefighting. Offers comfort, stability, lightweight and advanced harness materials for extended wear.

Offers precise overview of respiratory equipment status. Enhances safety with real-time information exchange between control point and wearer.

Suitable for the most extreme applications whenever Breathing Apparatus has to be worn. Compact and robust design, and excellent pneumatic performance.

Increases wearer safety during high-risk operations. Provides work positioning, fall prevention, and self-rescue. Easily integrated into Dräger PSS 5000, PSS 7000 and PSS AirBoss.

Developed for measurements with Dräger short-term tubes Opto-electronic analyser for the selective detection of carcinogenic and toxic substances Laboratory-quality measurements in the ppb range

Portable gas detection device for various gases.

30 meter extension hose compatible with the X-act 5000 gas detection pump.

The Dräger Pac® 6000 is a reliable single-gas detection device for CO, H2S, SO2, or O2, designed for personal air monitoring with a robust design tolerating extreme conditions and ensuring maximum safety for up to two years.

Non-disposable single-gas detection device detects 29 different gases including special gases like NO2, O3, or COCl2 for personal air monitoring Robust design, tolerating extreme conditions

Reliable non-disposable single-gas detection device with option of measuring two gases at once: H2S with CO, H2S with O2, or O2 with CO for personal air monitoring Robust design, tolerating extreme condition

Reliable non-disposable single-gas detection device for CO, H2S, SO2, O2 for personal air monitoring. Robust design tolerating extreme conditions with quick sensor response times and replaceable battery.

Flexible small control units for detection of toxic gases and oxygen as well as combustible gases and vapours. Forms a low-maintenance gas detection system for reliable protection.

Modular control system for a range of gases and vapors. Multicolor status light indicates the system status. Extensive networking including with additional gas detection systems.

Single platform for fire and gas control. ANSI/UL864 and NFPA 72 compliant. Supports digital and analog signals. Flexible interface for efficient communication.

Highly expandable control and analysis system. Monitors various gases and vapours. Suitable for complex gas warning systems.

Standalone control system with up to 16 configurable measuring channels. Modular setup for plant-specific customization.

Reusable gas-tight suit providing excellent protection against gaseous, liquid, aerosol, and solid hazardous substances, even in explosive areas. Designed for increased flexibility and comfort, suitable for confined spaces and cryogenic substances.

Limited-use chemical protective suit for industrial applications and operations involving gaseous, liquid or solid hazardous substances. Gas-tight type 1b suit with external self-contained breathing apparatus (SCBA) worn over the suit.

Reusable, gas-tight hazmat suit with SCBA worn inside the protective suit, designed for work in explosive areas and handling cryogenic substances. Provides protection against industrial chemicals, biological agents, and other toxic substances.

Disposable, gas-tight suit providing protection against a broad range of industrial chemicals as well as warfare agents. SCBA worn inside the protective suit.

Reusable, gas-tight suit providing protection against cryogenic hazardous substances and low concentrations of acids and alkalis, suitable for confined spaces. SCBA worn over the protective suit.

Reusable gas-tight suit with SCBA worn inside the protective suit. Available in five sizes (S-XXL) with side zipper for donning without assistance. Suit material Umex, reusable.

Explosion proof point infrared gas detector for continuous monitoring of flammable gases and vapours with drift-free optics and robust stainless steel SS 316L enclosure, suitable for harsh industrial environments including offshore installations.

Explosion proof point infrared gas detector variant with different measuring wavelength for detecting a broad range of flammable substances with superior accuracy.

Explosion proof point infrared gas detector. Continuous monitoring of flammable gases and vapours. Built for the harshest industrial environments.

Explosion proof point infrared gas detector. Continuous monitoring of carbon dioxide. Drift-free optics and robust product design.

Positive pressure closed circuit breathing apparatus designed for long-duration deployment, up to four hours. Ergonomically designed with safety and visibility in mind.

Canister specifically designed for the BG ProAir incorporating Drägersorb 400, pre-filled for easier use.

Monitors toxic gases or oxygen. Offers flexibility to configure the transmitter to fit exact application. Uses proven electrochemical DrägerSensors optimised for industrial applications.

Monitors over 60 toxic gases and oxygen in ambient air. Uses a high-performance plug-and-play electrochemical DrägerSensor. Robust, compact housing with IP66 protection.

Fixed gas detection for O2, H2S, NH3, Cl2, CO. Digital interface for system integration. Reliable and economic solution for non-explosion proof areas. Robust design for harsh environments.

Wireless transmitter for continuous monitoring of toxic gases and oxygen. Intrinsically safe and SIL2-rated. Operates continually for up to 24 months.

Continuous monitoring of flammable gases and vapours. Uses heat of reaction principle for detection. Suitable for harsh industrial environments.

Monitors toxic gases or oxygen in standard applications. Uses a high-performance plug-and-play electrochemical DrägerSensor. Robust, compact housing with IP66 protection.

Advanced explosion-proof transmitter for combustible gases. Uses a high-performance infrared Dräger PIR 7000 sensor. Detects most common hydrocarbon gases.

Monitors flammable gases in lower explosion limit (LEL). Uses an infrared DrägerSensor® IR. Configurable for methane, propane, or ethylene.

SensorAlive®: H2S sensor featuring an integrated gas generator for fully automated daily bump testing.

Early warning monitor for high-pressure gas leaks. Uses ultrasonic acoustic sensor for rapid response. Unaffected by environmental factors, ensuring reliable operation.

Advanced explosion-proof transmitter for flammable gases. Uses a catalytic bead DrägerSensor® Ex. Detects most flammable gases and vapours.

Advanced explosion-proof transmitter for combustible gases. Uses a high-performance infrared sensor. Detects most common hydrocarbon gases.

Advanced explosion-proof transmitter for combustible gases. Uses a high-performance infrared Dräger PIR 7000 sensor. Detects most common hydrocarbon gases.

Advanced explosion-proof transmitter for carbon dioxide detection. Utilizes high-performance infrared Dräger PIR 7200 sensor. Compatible with most control systems via HART®, Modbus, and Fieldbus.

Monitors carbon dioxide in volume percentage or ppm. Uses a high-performance infrared Dräger PIR 7200 sensor. Can be submerged in water without damage.

Cost-effective explosion-proof transmitter for flammable gas detection. Uses a catalytic bead DrägerSensor® Ex. Compatible with most control systems via 3-wire 4 to 20 mA analogue output.

A facepiece mask that covers the wearer's face and forms a tight seal to prevent contaminated air from entering. Certified to NFPA 2019 standards, it includes a transparent visor for improved visibility.

Dräger FPS 7000 with RP connection and hydration system, ideal for long-duration missions such as tunnel and subway fires.

Hands-free, fast and efficient communication for all wearers of respiratory protection devices during a mission. Excellent voice quality is achieved by removing interfering noises.

Displays continuous cylinder pressure. Easy to fit and remove, well-protected, and has a long battery life. Wireless operation with easy-to-read LEDs. For use with Dräger FPS 7000.

Reliable hands-free communication through a voice amplifier unit or radio device. Clear communication thanks to digital noise reduction technology.

Transmitter for continuous monitoring of flammable gases and vapours. Offers drift-free optics and robust product design. Suitable for the harshest industrial environments.

Converter module for mV signals of Dräger Polytron® SE Ex sensing heads. Suitable for primary explosion protection. Efficient and cost-effective with long-term stability.

Complete 1-channel gas detection system. Monitors toxic gases or oxygen in ambient air. Features a high-performance plug-and-play electrochemical DrägerSensor. Robust, compact housing with IP66 protection.

Complete 1-channel gas detection system. Monitors combustible gases in ambient air. Features a high-performance catalytic bead DrägerSensor. Robust, compact housing with IP66 protection.

Complete 1-channel gas detection system. Monitors carbon dioxide in ambient air. Uses high-performance plug-and-play electrochemical DrägerSensor. Robust, compact housing with IP66 protection.

Complete 1-channel gas detection system. Monitors combustible gases or vapours in ambient air. Uses high-performance Dräger PIR 7000 infrared sensor. Remote sensor monitoring up to 30 meters away.

Miniature electrochemical sensors monitoring of toxic gases and lack of oxygen compatible with: Pac series and X-am family measuring range: in vol.-% and ppm

Electrochemical sensor variant for detecting carbon monoxide gas with very good performance.

Electrochemical sensor variant for detecting oxygen gas with very good performance.

Electrochemical sensor variant for detecting ammonia gas with very good performance.

Electrochemical sensor variant for detecting nitric oxide gas with very good performance.

Electrochemical sensor variant for detecting low concentration nitrogen dioxide gas with very good performance.

Performs semi-automatic static and dynamic tests. Tests full-face masks, chemical protection suits, and compressed air breathing apparatus for functionality and leak tightness. Intuitive user guidance of the software.

Performs fully automatic static and dynamic tests. Tests full-face masks, chemical protection suits, and compressed air breathing apparatus for functionality and leak tightness.

Automatic wireless PASS system alerts team if wearer is motionless or distressed. Emits clear and distinctive signals and alarms. Wireless data transmission from the pressure gauge to the PAS device.

Automatic wireless PASS system alerts team if wearer is motionless or distressed. Emits clear and distinctive signals and alarms. Rugged design for use under demanding conditions.

Electrochemical sensor variant for detecting organic vapors.

Electrochemical sensor variant for detecting organic vapors.

Electrochemical sensor variant for detecting carbon monoxide gas with long stability.

Electrochemical sensor variant for detecting high concentration hydrogen sulfide gas.

Electrochemical sensor variant for detecting low concentration hydrogen sulfide gas.

Electrochemical sensor variant for detecting high concentration hydrogen gas with MEC technology.

Electrochemical sensor variant for detecting chlorine gas with MEC technology.

Electrochemical sensor variant for detecting carbon monoxide gas with MEC technology.

Electrochemical sensor variant for detecting hydrogen sulfide gas with MEC technology.

Electrochemical sensor variant for detecting oxygen gas with MEC technology.

Electrochemical sensor variant for detecting ammonia gas with MEC technology.

Mine rescue vehicle with integrated air supply, medical tools, and advanced navigation. Enhances mobility and response, providing comprehensive support in emergencies.

Mine rescue vehicle with integrated air supply, medical tools, and advanced navigation, enhancing mobility and response in emergencies.

Three versions of liquid-tight suits with limited use: overall with hood, suit with facial cuff, and full-body suit with visor, protecting against finest particles, powders, many concentrated inorganic acids and alkaline solutions.

Ventilated splash-protective suit with limited use, suitable for use in explosive areas, providing continuous supply of breathing air and cooling airflow (type 3 suit), and protection against chemicals.

Ventilated disposable splash-protective suit that offers protection, comfort, and flexibility with continuous supply of breathing air and cooling airflow when combined with vest CVA 0700.

Reusable overall with hood providing protection from liquids and dust, suitable for cleaning work and handling chemicals, available in robust PVC or light, water vapour permeable Flexothane.

Electrochemical sensor for detecting ammonia gas.

Electrochemical sensor for detecting ammonia gas.

Electrochemical sensor for detecting high concentration hydrogen peroxide.

Electrochemical sensor for detecting low concentration hydrogen peroxide.

A composite air cylinder with 6.8 liters capacity and 300 bar pressure for breathing apparatus.

A steel air cylinder with 6.0 liters capacity and 300 bar pressure for breathing apparatus.

50-foot escape rope kit with Lightening GT anchor for emergency escape.

50-foot escape rope kit with Crosby anchor for emergency escape.

XT mouthpiece for Interlock devices, sold in packs of 300.

High CO2 absorption with large active surface. Reproducible absorption with even cartridge filling. High abrasion resistance reduces dust. Low breathing resistance from hemispherical pellets.

Sampling tube used for collecting hazardous substances in the air using activated charcoal as the medium for laboratory analysis.

Sampling tube designed for hazardous air substances using activated charcoal medium, compliant with NIOSH standards.

Sampling tube for air hazardous substances using activated charcoal medium for laboratory analysis.

Power supply unit with 0.600 A output and 11 V voltage.

Power supply unit with 12V output and 5A current.

Power supply unit with 3.2A output and 5V USB-A connection.

Breath alcohol testing device by Dräger, version 2, for workplace and law enforcement use.

Breathalyzer device for alcohol testing with quantitative measurement and robust design.

Standard model of Dräger's breath alcohol testing device for workplace and law enforcement use.

Standard version of the Alcotest 7000 breathalyzer for alcohol testing with quantitative results.

Basic breathalyzer for alcohol testing with reliable quantitative results.

Standard version of the Alcotest 6000 breathalyzer for alcohol testing with quantitative results.

Standard breathalyzer for alcohol testing with reliable quantitative results.

Spare part sleeve compatible with Dräger Alcotest models A7110, A8610, and A9510.

Sensor component for Alcotest devices.

Protective case designed for Dräger Alcotest screener devices, large size.

Regulation valve for Alcotest devices.

Hand strap accessory for Alcotest devices.

Sampling tube using silica gel medium for collecting hazardous substances in air for laboratory analysis.

Sampling tube using silica gel medium for hazardous air substances collection for laboratory analysis.

Cooling vest providing cooling action without pre-freezing or dipping into water, reducing skin temperature by approx. 3 – 4 °C, lasting up to 4 hours depending on work and ambient temperature.

Mini service holder accessory for IL 7x00/5000 alcohol ignition interlock devices.

Handset holder II for IL 7x00/5000 alcohol ignition interlock devices.

Medium storage bag with dimensions L230xW195xH75 mm.

Mobile printer accessory for Dräger breath alcohol testing devices.

Bluetooth enabled mobile printer for Dräger testing devices.

Curly cord accessory for alcohol ignition interlock devices, length 1m + 0.5m.

Drug testing kit by Dräger for detecting six different drugs in saliva.

Yellow pouch for Alcotest 5820 and 6000 devices.

Yellow pouch for Alcotest 6820 device.

Escape devices such as escape hoods and self-contained escape devices providing reliable breathing protection in emergencies like fire or gas leaks, delivering safe breathable air for escape.

Constant flow emergency escape breathing apparatus with hood, lightweight design, and easy-to-activate. Provides up to 15 minutes of lifesaving air and complies with NIOSH, ABS, SOLAS, and TC approvals.

Light compressed-air breathing apparatuses suitable for short periods of use and rescue devices in emergencies, with a wide range of components for long-term use such as by firefighters.

The Dräger Saver CF15 is a constant flow emergency escape breathing apparatus designed for railroad use, compliant with Federal Railroad Administration regulations. It provides up to 15 minutes of breathing air through a flame-retardant hood with a large visor, suitable for rapid escape from hazardous environments.

Battery operated devices drawing in ambient air and passing it through a filter into the headpiece, leading to virtually no breathing resistance and enabling longer wear time and free breathing during demanding tasks.

A premium industrial escape hood set in bright yellow color for high visibility.

Short duration and emergency escape unit. Ergonomically adjusted to the contours of the back. Heat and flame resistant according to EN 137.

Provides fresh air in seconds, ensuring safety in hazardous gases. Easy installation and maintenance-free for ten years.

Closed Circuit Escape Respirator offering 60 minutes of escape time with automatic oxygen supply activation. NIOSH approved Capacity 3 (Cap III) CCER.

Rescue Pack System designed for rapid intervention teams. Provides independent air supply in hazardous atmosphere. Compact and lightweight, with low maintenance requirements.

Provides short duration breathing protection in vehicle cabins. Independent of environmental atmosphere. Suitable for wildland firefighting, tunnel rescue, or underground mine rescue.

Simple, robust SCBA for industrial applications. Can be further adapted to suit specific industrial applications. Compatible with Dräger Panorama® Nova and FPS® 7000 full face masks.

Head pieces used where ANSI approved head and eye protection are not mandated but necessary. Provide protection from airborne hazards and comfort in pharmaceutical, chemical, or healthcare applications.

Full face mask for civil defense and protection. Approved in accordance with NIOSH CBRN and EN-Norm. Available in various sizes for a comfortable fit.

High-performance ICU ventilator with advanced lung protective ventilation treatment tools. Non-invasive for as long as possible with an aesthetic design enabling quick and efficient operation using an 18.3” screen.

Special filters offering civil defence and protection against a variety of hazardous chemicals. With standard thread connection Rd40.

Enables incident manager to monitor respiratory equipment wearers and their deployment time. Simultaneously monitors up to three teams. Easy to read displays with countdown timers.

Digital system connecting individual Dräger products for optimal equipment management Provides real-time position and status of gas detection equipment

High-quality sensors developed by Dräger monitoring of toxic gases and oxygen deficiency including hydrides, amines, organic vapours compatible with: X-am 3000 and X-am 7000 measuring range: in vol.-% and ppm

Provides full control of portable Dräger gas detection instruments Automatic bump tests and calibrations Comprehensive documentation and evaluations

Automatic switch over valve for uninterrupted air supply. Connects a compressed air breathing apparatus to an external air supply.

Selective VOC gas detection For frequent testing of toxic & carcinogenic substances Laboratory quality results in very low concentrations Benzene measurement starting from 5 ppb No consumables per measurement

Wide range of accessories including special belts for frequent decontamination, welding belts, hose protective covers, and belt extensions.

Touch panel displaying data from Dräger VarioGard gas detector. Displays measurement values and status messages. Accessible from anywhere within your network.

Specialized set for detecting up to five different chemical agents simultaneously in just five minutes Easy handling, cost-effective, and requires minimal training No calibration needed

Full face mask protecting the respiratory tract and eyes. Offers different thread connections: RA (Rd40), PE (M45x3), ESA or P Dräger plug-in connection. EPDM or silicone mask body, triplex or PC visor.

More than 200 different Dräger-Tubes® are available to accurately make spot measurements for over 500 gases and vapors. They are used with manual or automatic sampling pumps for short-term gas detection.

Various particle, gas and combination filters to protect against multiple hazardous substances, used with half- and full-face masks.

Refuge chamber which provides mining personnel both shelter and breathing protection with the highest quality and safety standards. Robust and highly portable construction, as well as a low cost of maintenance.

Detects flammable gases and vapours. Long-term stability due to double-detector compensation method.

Dedicated full-face mask for defense forces. Protection against biological and chemical warfare agents, and particles of radioactive substances. Available in various sizes.

Full face masks from X-plore 6000 series, FPS 7000, and Panorama Nova that can be used with blower units for maximum respiratory protection, ideal for use with additional PPE like head and hearing protection or protective suits.

A digital transmitter with an integrated infrared optical DrägerSensor that detects flammable gases such as methane and LPG in non Ex areas like underground garages and laboratories.

Sampling unit for continuous gas and air mixture sampling. Equipped with a vibrating diaphragm pump for superior life expectancy. Ideal for monitoring occupational exposure limits.

Compact all-rounder for the static tests of breathing protection equipment. Reliable, easy, and convenient testing.

Filter protection system for vehicles. Protects against tear gases and contaminants in breathing air. Creates protective positive pressure inside the vehicle.

Combination of helmet or bump cap with covering hood for respiratory and head protection with high chemical resistance, suitable for heavily soiled or chemical exposure environments.

Descent device kit compliant with NFPA standards for emergency escape.

Advanced neonatal ventilation with easy and efficient operation using an 18.3” screen. Supports lung and brain protective ventilation modes and a developmental care-friendly environment.

Electrochemical sensor variant for detecting hydride gases with special characteristics.

One-piece chemical protection suit with gas-tight integrated full face mask and SCBA worn inside. Resistant to alkaline solutions and acids. Suitable for tank cleaning and maintenance work.

Detection of volatile organic compounds in low concentrations Compatible with: X-am 7000 and X-am 8000 - selective benzene measurement with pre-tubes possible Measuring range: in ppm and ppb range

Simulates presence of fire for testing Flame 5000. Designed for extreme offshore environmental conditions.

Electrochemical sensor variant for detecting low concentration hydrogen cyanide gas.

Automatic accountability system providing live information on all SCBA wearers. Enables rapid deployment and minimises the need for voice communication via radio. Allows remote monitoring with incident reporting.

Electrochemical sensor for detecting hydrogen gas.

ANSI approved head protection helmets with shrouds made of fire-resistant Zytec or chemical-resistant Tychem®. Also offers bump caps with Tychem® shrouds for applications where ANSI helmets are not required.

Compact and robust lung demand valve suitable for extreme applications requiring breathing apparatus, delivering excellent pneumatic performance.

Electrochemical sensor variant for detecting oxygen gas with long stability.

Rapid intervention team (RIT) device for firefighter rescue. Provides emergency air supply to downed firefighters. Compact, portable, and easy to deploy. Enhances firefighter safety during rescue operations.

Device for spot measurements with a limited number of strokes, featuring an integrated stroke counter for safe control and easy one-hand operation, suitable for use in explosive areas.

Electrochemical sensor for detecting hydrazine gas.

Electrochemical sensor for detecting sulfur dioxide gas.

A gas detection tube system for simultaneous detection of multiple gases.

Electrochemical sensor with integrated gas generator. Daily automatic sensor testing. Improves safety and minimises service efforts.

Electrochemical sensor for detecting phosphine and arsine gases.

Function testing for gas detection and warning devices Simple, cordless and portable

Electrochemical sensor designed for selective measurement of toxic gases and oxygen with fast response, high accuracy, great stability, and long life.

Electrochemical sensor for detecting hydrogen chloride gas.

Compressed Air Breathing Cylinders designed using leading technology and advanced materials. For use in any application requiring breathing protection. Offering lightweight and Non-Limited Life (NLL) performance.

Portable oxygen supply unit for emergencies. Lightweight and easy to carry. Provides a reliable source of oxygen in critical situations.

Provides safe haven underground during emergencies. Equipped with breathing gas systems for protection. Customizable to individual mine requirements.

Electronic signal and warning unit for use with Dräger PSS® 7000 and PSS® 5000 self-contained breathing apparatus. Provides continuous monitoring of personal information and operational status.

Electrochemical sensor for detecting carbonyl chloride gas.

Electrochemical sensor for detecting nitric oxide gas.

Electrochemical sensor for detecting ozone gas.

Manages up to 100 transmitters for various gases. Multifaceted alarm management. Simple operation with intuitive interface.

High-performance soda lime for efficient CO2 absorption. Available in disposable and reusable formats. Low dust generation with high abrasion resistance. Suitable for medical and industrial applications.

Explosion-proof gas camera that continuously monitors large areas for hazardous methane leaks and fugitive emissions, quantifies source and intensity, and transmits alarms.

Accessory device that efficiently opens tips of Dräger-Tubes, enhances safety by containing tube tips for disposal, and is simple to operate.

Portable testing unit for reliable and easy leak testing of chemical protection suits and valves before use.

Respiratory protection kit designed for wildland firefighters. Includes a mask and filter system for protection against smoke and particulates. Lightweight and easy to use in the field.

Ampoules for checking flow in gas detection tubes.

Robust cylinders made of aircraft-grade materials with various capacities and pressures, customizable with colors and logos for fire departments or jurisdictions.

Integrates and centralizes real-time monitoring, alarm and retrospective data to support clinical workflow. Supports up to 32 patients and up to 64 patients for alarm surveillance. Storage of up to 120 hours of event and full disclosure storage. Displays data and alarms from Dräger ventilators and anesthesia machines.

Disposable dust masks for protection against fine dusts, solid and liquid particles with NIOSH N95 & EN FFP (FFP1, FFP2 & FFP3) protection classes available based on certain models.

Multi-unit charger for respirator batteries

Diffusion sampler for collecting air samples for hazardous substance analysis.

Rechargeable battery pack for the X-act 5000 gas detection device.

Wireless IoT solution for process monitoring and analysis. Converts reliable measurement data into valuable information. Accessible online for analysis, visualization, monitoring, and storage.

Compact communication solution powered by two-way radio, featuring SENS® Technology for enhanced speech and noise suppression. Includes lightweight boom microphone headset and in-ear microphone option for PAPR helmet and hood users.

Efficient filling station for common oxygen cylinders with compact design and automated filling procedure.

Supporting loop accessory for Dräger devices.

Control unit for the tactical transmitter with integrated loudspeaker and microphone. Allows independent use with radio receiver. Tough and robust design according to IP67 / MIL-STD-810G standards.

Sampling set designed for collecting isocyanate substances in air for laboratory analysis.

C500 and C700 integrates physiological monitoring with a medical-grade workstation for real-time vital signs and clinical data management. Customize monitoring display based on your department and patient acuity. Access your hospital web-based clinical applications using configurable tabs without obscuring active monitoring. Communication-ready with Dräger ventilators, Dräger anesthesia workstations, Maquet Servo-I ventilators, BIS, Edwards, and Masimo Radical monitors.

Suction mount for face engine hood models UCF 6, 7, 8, and 9000.

Centrally monitors vital signs of up to 64 patients connected to Vista 120 monitors. Streamlines workflows with bi-directional control and flexible report exporting. Displays ventilation numeric values and waveforms for comprehensive patient data. Supports easy integration with hospital information systems via HL7 protocol.

SENS® Technology with two-way radio integration providing 360º situational awareness. Enhances speech while suppressing noise.

Designed for intra-hospital transport and the flexibility for advanced critical care. Single handed undocking and docking helps to ensure fast transport to Pick and Go. Stores up to 72 hours of trends and events, accessible upon docking. Storage expands to 96 hours with the C500 or C700. When using during transport with integrated measurements, M540 can operate up to 4 hours in screen saver mode. Advanced measurements are easily added without compromising cable management. Supports wired and wireless connectivity with Infinity CentralStation to preserve data and alarm continuity.

See monitoring parameters at the bedside on the smart display. Select a display to meet the needs of your care area. View parameters with a customized layout of the smart display. Keeps patient data secure.

Identifies air flow movements Simple and easy to use Suitable for checking air-tight systems and visible leaks

Replacement sampling unit for Dräger alcohol and drug testing devices.

Chest strap compliant with Berry Amendment and NFPA 2018 standards.

Sampling tube for collecting amines in air for laboratory analysis.

Designed for spot check and continuous monitoring with an 8" touchscreen. Supports plug and play measurement capabilities for efficient workflow. Innovative Ward Round mode for streamlined patient admissions. Embedded Early Warning Score for monitoring patient deterioration. Compatible with the Vista Patient Monitoring System.

Data interface cable from USB to 3.5 mm for Dräger devices.

Hygienic flow funnel for A5000 and A7000 breathalyzer models, pack of 10 pieces.

Visors providing protection during welding and cutting, with high comfort, shade levels 4-13, and Auto Darkening Filters (ADF), including a premium flip-up ADF visor.

12 V vehicle cable for powering Dräger devices in vehicles.

Mouthpiece consumable for Dräger Interlock 7x00/5000 alcohol ignition interlock systems, sold in packs of 300 pieces.

Calibration adapter for the Alcotest-5000 device.

Rechargeable NiMH AA battery with 1.2 V output.

15" TFT touchscreen with high resolution for clear visibility. Configurable layout displaying up to 13 waveforms. Numeric values include Heart Rate, SpO2, NIBP, respiration, and dual temperature. Seamless connectivity with Dräger devices for integrated workstation functionality. Compatible with the Vista Patient Monitoring System.

Protective case for DrugTest 5000 device.

Carrying case compatible with Alcotest A5000 to A7000 series.

Yellow protection and carrying bag for Alcotest A7000.

Monitors up to 128 patients’ vital signs with real-time and retrospective data. Supports inter-departmental data access for advanced decision support. Enhances workflow efficiency with bi-directional control and alarm settings. Allows remote access to patient data and comprehensive reporting capabilities.

Carrying bag for Alcotest A5000 device.

Hand loops set accessory for Alcotest 6820.

Facilitates data exchange between Infinity Network and hospital information systems. Featuring data exchange formats in HL7 and WinAccess API for the highest level of custom integration. Allows for the import of lab results and patient demographics to the Infinity Acute Care System, also export of clinical data to electronic medical records.

Microfibre bag for Alcotest 3820 and 4000 devices.

Housing set for Alcotest 6820 device.

Keypad accessory with 6-Pol MiniDIN/USB connection, QWERTY layout.

Yellow reflex foil set for Alcotest A5000.

Handset holder for IL 7500 alcohol ignition interlock device.

Drug testing kit by Dräger for detecting multiple drugs in saliva.

Handset holder compatible with IL 7500, IL 7000, and IL 5000 alcohol ignition interlock devices.

Complete holster set for Alcotest A7510.

Control box component for Interlock alcohol ignition interlock devices.

Screen protector foil for IL 7000 alcohol ignition interlock device to protect the display.

Kit for confirming drug presence in saliva samples by Dräger.

Converter from USB to PS/2 interface.

Transmits patient information between Vista network and hospital systems. Supports up to 256 patients with automatic and wireless documentation. Enhances clinical decision-making with secure data exchange and reduced manual entry. Integrates vital signs, alarms, and ADT data for a complete clinical view.